RIAL Other elements of suspension system
riyal kit (set of 4 wheels) 12x1, 5X32, 70.0/67.1
ATS Other elements of suspension system
ATS kit / Exclusive Line, 4 cone nut M12x1, 25, ring ADY3, 72.6/66.1
NE Crank bearing halfshell
Conrod bearing set (+0,50)
| Size +0,50 |
BLOCKY Lock bolt
M12X1.25X34 mm, flat washer
TOURMAX Steering bearing
Frame head bearings set 25x47x15 25x47x15 fits: KAWASAKI KDX, KL, KX 65-400 1974-2012
| Name Frame head bearings set |
| Outer diameter [mm] 47 |
| Inner diameter [mm] 25 |
MPBS Suspension sleeve
Polyurethane stabilizer bushing (2pcs, front stabilizer, L/R, hardness: 80 Sha, inner diameter 25mm, outer diameter 50mm) fits: JEEP fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01
| Fitting place front stabilizer |
| Fitting side Right Left |
| Inner diameter [mm] 25 |
| Outer diameter [mm] 50 |
| Height [mm] 44 |
| Height 2 [mm] 32 |
| Quantity per set [pcs] 2 |
| Hardness 80 Sha |
| Fitting position Front Inside |
| Offer Tuning |
MPBS Suspension sleeve
Polyurethane bushings basic set (25pcs, acentric sleeves included; no stabilizer sleeve, L/R, hardness: 80 Sha) fits: BMW 3 (E36) 09.90-11.98
| Fitting side Right Left |
| Quantity per set [pcs] 25 |
| Hardness 80 Sha |
| Fitting position Front Rear |
| Offer Tuning |
MPBS Suspension sleeve
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, external, hardness: 80 Sha, inner diameter 21mm, outer diameter 49mm) fits: VW fits: VW TRANSPORTER T5 04.03-08.15
| Fitting place rear stabilizer |
| Fitting place 2 external |
| Fitting side Right Left |
| Inner diameter [mm] 21 |
| Outer diameter [mm] 49 |
| Height [mm] 50.5 |
| Height 2 [mm] 40 |
| Quantity per set [pcs] 2 |
| Hardness 80 Sha |
| Fitting position Rear |
| Offer Tuning |
ATHENA Wheel bearing
Wheel bearing kit rear (with sealants)
| Name Wheel bearing kit |
| Fitting position Rear |
PIVOT WORKS Wheel bearing
Wheel bearing kit front (with sealants)
| Name Wheel bearing kit |
| Fitting position Front |
HARDRACE Suspension sleeve
Reinforced bushing (2pcs, trailing arm, L/R, front) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III; ROVER 400 II, 45 I 09.87-05.05
| Fitting place trailing arm |
| Fitting place 2 front |
| Fitting side Right Left |
| Quantity per set [pcs] 2 |
| Fitting position Rear |
| Offer Tuning |
USA Wheel suspension track control arm, front
Front axle track control arm R top (vehicles with AAS) fits: FORD USA EXPEDITION; LINCOLN NAVIGATOR 4.6/5.4 09.02-08.14
| Fitting side Right |
| Fitting position Top |
MPBS Suspension sleeve
Rear swingarm bushings (rear) (2pcs, trailing arm - rear, L/R, bottom, hardness: 80 Sha, inner diameter 12mm, outer diameter 45mm) fits: OPEL; SAAB fits: OPEL VECTRA B; SAAB 9-5 09.95-12.09
| Fitting place trailing arm - rear |
| Fitting place 2 bottom |
| Fitting side Right Left |
| Inner diameter [mm] 12 |
| Outer diameter [mm] 45 |
| Height [mm] 52 |
| Height 2 [mm] 23.5 |
| Quantity per set [pcs] 2 |
| Hardness 80 Sha |
| Offer Tuning |
USA Front axle ball joint
Axle ball joint L/R (front) (lower) fits: CHEVROLET TRAILBLAZER 4.2 09.01-09.08
| Fitting side Right Left |
| Fitting position Front |
TEN CAR Link stabilizer
Stabilizer link rear L 122,5mm fits: JEEP CHEROKEE 2.0-3.2 11.13-
| Fitting position Rear |
| Fitting side Left |
| Thread size [mm] M10 |
| Thread pitch [mm] 1.25 |
| Length [mm] 122.5 |
USA Wheel hub
Wheel hub rear (with a bearing) fits: HONDA ODYSSEY 3.5 09.05-
| Fitting position Rear |
| With a bearing Yes |
PETERS Knuckle gasket/seal
Steering knuckle seal
OE VOLVO Zinc coated hexagon nut
Nut 6-point; Zinc coated nuts fits: VOLVO
| Screw type Zinc coated nuts 6-point |
| Neck Yes |
OE IVECO Wheel hub gasket/seal
Wheel hub seal fits: IVECO
KNORR Height adjustment valve
Height adjustment valve fits: IVECO EUROTECH MH, EUROTECH MP, EUROTECH MT, EUROTRAKKER 01.92-
MPBS Suspension sleeve
Rear upper swingarm bushings (2pcs, rear top swingarm, L/R, bottom, hardness: 80 Sha, inner diameter 12mm, outer diameter 47,2mm) fits: ALFA ROMEO fits: ALFA ROMEO 166 09.98-06.07
| Fitting place rear top swingarm |
| Fitting place 2 bottom |
| Fitting side Right Left |
| Inner diameter [mm] 12 |
| Outer diameter [mm] 47.2 |
| Height [mm] 50 |
| Height 2 [mm] 40 |
| Quantity per set [pcs] 2 |
| Hardness 80 Sha |
| Fitting position Rear |
| Offer Tuning |
DEUTER Suspension sleeve
Suspension sleeve, 4pcs, fitting position: front/rear, spring, hardness: 90 Sha (rises to 40mm) fits: MERCEDES G (W460) 2.3-3.0D 03.79-07.93
| Quantity per set [pcs] 4 |
| Fitting position Front Rear |
| Fitting place spring |
| Hardness 90 Sha |
| Offer Tuning |
OE DB TRUCK Gearbox bearing
Gearbox bearing (main shaft; rear) MERCEDES G 211-12 KL; G 230-12 KL
MPBS Suspension sleeve
Polyurethane spring washer (1pcs, rear, L/R, hardness: 90 Sha, inner diameter 83mm, outer diameter 132mm) fits: OPEL fits: OPEL FRONTERA A, FRONTERA A SPORT 03.92-10.98
| Fitting place rear |
| Fitting side Right Left |
| Inner diameter [mm] 83 |
| Outer diameter [mm] 132 |
| Height [mm] 64 |
| Height 2 [mm] 42 |
| Quantity per set [pcs] 1 |
| Hardness 90 Sha |
| Offer Tuning |
MPBS Suspension sleeve
Polyurethane bushings basic set (18pcs, no stabilizer sleeve, rear axle, L/R, hardness: 80 Sha) fits: ALFA ROMEO fits: ALFA ROMEO 166 09.98-06.07
| Fitting place rear axle |
| Fitting side Right Left |
| Quantity per set [pcs] 18 |
| Hardness 80 Sha |
| Fitting position Front |
| Offer Tuning |
PNEUMATICS Pneumatic suspension level sensor
Air suspension level sensor fits: RVI KERAX, PREMIUM 04.96-
4 RIDE Suspension repair kit
ATV (A-Arm) swingarm repair kit rear (for one side) fits: POLARIS HAWKEYE, SPORTSMAN 300/400 2008-2011
| Name Suspension repair kit |
| Name of product range ATV (A-Arm) swingarm repair kit |
| Fitting position Rear |
TOURMAX Wheel bearing
Wheel bearing kit front (with sealants) fits: HONDA TRX 300 1993-1996
| Name Wheel bearing kit |
| Fitting position Front |
TOURMAX Wheel bearing
Wheel bearing kit rear (with sealants) fits: HONDA CR 80 1986-1991
| Name Wheel bearing kit |
| Fitting position Rear |
TOURMAX Wheel bearing
Wheel bearing kit rear (with sealants) fits: HONDA CR 125/250/500 1988-1989
| Name Wheel bearing kit |
| Fitting position Rear |